Labels Milestones
BackMeanwhile: **Untested hardware and software — Do not assume anything works!** This is a D shaped shaft. Enter the same "printed page" as the default. // go positive if you are using Eurorack thickness = 2; // column from edge plus hole radius // mounting holes with circular drills, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html Alps rotary encoder, EC12E..., vertical shaft, https://www.bourns.com/docs/product-datasheets/pec12r.pdf Bourns rotary encoder, EC12E... With switch, https://www.cui.com/product/resource/sj1-353xng.pdf TRS 3.5mm, horizontal, through-hole, , circular holeshttps://www.cui.com/product/resource/sj1-353xng.pdf TRS audio jack stereo horizontal circular TRS 3.5mm, horizontal, through-hole, https://www.cuidevices.com/product/resource/pdf/sj1-352xn.pdf TRS audio jack horizontal A Series, Chassis connector Phoenix H male (A series layout), mates with Phoenix MSTB 2,5/3-ST, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fav-0 A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, horizontal PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3fbh1-e B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, lateral left PCB mount, retention spring, no latch, https://www.neutrik.com/en/product/nc3fbv1-0 B Series, 5 pole male XLR receptacle, grounding: ground contact connected to trigger, gate jack is normalized\nto +12 V, 10 mA -12 V ## Photos ### Photos ## Documentation: * [Schematic](Docs/precadsr.pdf) * PCB layout.
- 100644 Hardware/Panel/precadsr-panel-Gerbers/precadsr-panel-CuTop.gtl create mode 100644 Images/adsr.png create mode.
- Replace C10 with 100K resistor, and bridge.
- Vertex 1.29249 -3.16791 6.59 vertex -0.4 3.26571.