Labels Milestones
Back7.2 of http://www.st.com/resource/en/datasheet/stm32f378vc.pdf WLCSP-72, 9x9 raster, 4.4084x3.7594mm package, pitch 0.65mm; see section 7.4 of http://www.st.com/resource/en/datasheet/DM00366448.pdf WLCSP-168, 12x14 raster, 4.891x5.692mm package, pitch 0.8mm; see section 7.6 of http://www.st.com/resource/en/datasheet/stm32f429ng.pdf UFBGA-201, 15x15 raster, 10x10mm package, 0.5mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=266, NSMD pad definition (http://www.ti.com/lit/ds/symlink/bq51050b.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf Texas Instruments LM25119 http://www.ti.com/lit/ds/symlink/lm25119.pdf WQFN, 42 Pin (http://www.ti.com/lit/ds/symlink/ts3l501e.pdf#page=23), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV-A, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 2.5 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-502, 45Degree (cable under 45degree), 5 pins, pitch 10mm, size 115x8.1mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00019, 9 pins, pitch 6.35mm, hole diameter 0.7mm THT pad as test point, loop diameter2.6mm, hole diameter 0.9mm, outer diameter 1.5mm, size source.
New Pull Request