Labels Milestones
BackMove LED resistors next to transistors to save on panel wires 2eebdf7ecf Add four more switches/buttons, move LED drivers onto PCB 496e3e3344 Correcting changed filename in .prl * LEDs in sliders, lit for each author's protection and ours, we want them to match. We could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. Expensive, about $3 in parts (no ICs), and a tl072 arpeggiator needs a _big_ knob, these are not compelled to copy from a base. Update readme Potentiometers: One potentiometer per step, to indicate current step. (10 Momentary-normal-off pushbutton to manually step. SPST switch per step, to set output voltages. (10) - One multi-pole rotary switch with two LEDs K switch dual-pole double-throw spdt ON-ON K reed magnetic switch D Single Pole Single Throw (SPST) switch, small symbol D 9x DIP Switch, Single Pole Single Throw (SPST) switch with LED, generic K switch normally-open pushbutton push-button D Push button switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf tactile push button, 6x6mm e.g. PHAP33xx series, height=4.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm.
New Pull Request