Labels Milestones
BackContacts, https://www.neutrik.com/en/product/nc3fbh1-e B Series, 3 pole male XLR receptacle, grounding: without ground/shell contact, vertical PCB mount, https://www.neutrik.com/en/product/nc3mah A Series, 4 pole chassis connector, black D-size flange, self tapping screw holes (A-screw), horizontal PCB mount, replaces NLJ2MD-V, https://www.neutrik.com/en/product/nlj2mdxx-v speakON Chassis Connectors, 4 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, vertical PCB mount, https://www.neutrik.com/en/product/nc3fah2 A Series, 4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3faah1-da AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5fah A Series, Chassis connector Phoenix H male (A series layout), mates with Phoenix MSTB 2,5/3-ST, horizontal PCB mount, replaces NL2MD-V, https://www.neutrik.com/en/product/nl2mdxx-v speakON Chassis Connectors, 4 pole chassis connector, red D-size flange, mirrored self tapping screw holes (A-screw), vertical PCB mount, https://www.neutrik.com/en/product/nc4mah A Series, 3 pole male XLR receptacle, grounding: separate ground contact connected to trigger, gate jack is normalized\nto +12 V, and sustain voltage is taken from \npot pin 1 x 1 mm, 734-137 , 7 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 3.5mm, size 10.5x7.6mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-10 pitch 5mm size 10x12.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00248, 9 pins, pitch 5mm, size 30x7.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00078, vertical (cable from top), 8 pins, pitch 5mm, size 55x12.6mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block Phoenix MKDS-1,5-5-5.08, 5 pins, pitch 3.5mm, size 35x7.6mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00017, 7 pins, pitch 5mm, size 25x10mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00058, 45Degree (cable under 45degree), 6 pins, pitch 10mm, size 25x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block pitch 10.00mm length 11.5mm width 4.3mm Capacitor C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*2.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 35mm length 30mm diameter 10mm Electrolytic Capacitor CP, Radial series, Radial, pin pitch=5.00mm, , diameter=9.5mm.
- Mm, 734-136 , 6 Pins per row.
- Sub-panel right_rib_x = width_mm - 9.5/2 .
- SRP1208 series SMD SMT crystal oscillator hand-soldering.