Labels Milestones
BackRadioShaek2Board.diy UX Rollup: 2x Sockets, all three pins need wires: - clk in - RESET / CASCADE in - glide in (sleeve and normal both GND 6x Sockets, 2pin: Gate out (could normal to TP10, optional Once/Cont 11 Toggle Switches, 3pin: 11 Toggle Switches, 2pin: - all step switches (all go to same bus run/stop 2x Pushbutton switches, all 2pin: - reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below) - Clock In - ~27K to U3-8? No, transistors maybe activate? - Clock in socket with 80 contacts (40 each side), through-hole, http://www.4uconnector.com/online/object/4udrawing/10156.pdf 4UCON 10156 Card edge socket with 80 contacts AT ISA 16 bits Bus Edge Connector x1 http://www.ritrontek.com/uploadfile/2016/1026/20161026105231124.pdf#page=70 Highspeed card edge connector for PCB's with 20 contacts (not polarized Highspeed card edge connector for 2.4mm PCB's with 05 contacts (polarized conn samtec card-edge socket high-speed 0.8 mm Highspeed card edge connector for 1.6mm PCB's with 50 contacts (polarized Highspeed card edge connector for 2.4mm PCB's with 50 contacts (polarized Highspeed card edge connector for 1.6mm PCB's with 40 contacts (polarized Highspeed.
- -0.1915 facet normal 0.962632 0.191481 -0.191508 facet.
- Normal -0.547909 0.449652 0.705414 vertex 6.69544 -6.69544 3.54602.
- Normal 0.555549 -0.831484 1.07979e-05 vertex -1.75966.