synth_tools

Back

We also recommend that a corner edge of the rail + a safety margin // margins from edges v_margin = hole_dist_top*2 + thickness; col_left = thickness * 1.2; right_rib_x = width_mm - col_right - thickness; left_panel_spacing = left_panel_width / 3 + tolerance*8; right_panel_width = width_mm - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off - Glide attenuator (B10k) (join two left pins from below Clock rate (B100k) (not sure yet which 2 pins diameter 5.0mm z-position of LED center 1.6mm 2 pins LED, diameter 3.0mm, hole diameter 0.7mm, wire diameter 1.0mm low profile wire loop bead wire loop as test Point, square 3.0mm side length, hole diameter 1.3mm, length 11.3mm, width 3.0mm Capacitor C, Rect series, Radial, pin pitch=10.00mm, , diameter=40mm, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf CP Axial series Axial Vertical pin pitch 7.50mm length 9mm width 5.0mm Capacitor C, Rect series, Radial, pin pitch=7.50mm, diameter=16mm, height=31.5mm, Non-Polar Electrolytic Capacitor CP, Radial series, Radial, pin pitch=7.50mm, , length*width=9*9.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 15.00mm length 18mm diameter 10mm Electrolytic Capacitor C, Rect series, Radial, pin pitch=10.00mm, , length*width=13*6mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 17.78*30.48mm^2 length 43.18mm width 22.86mm Bourns 8100 L_CommonMode_Toroid, Vertical series, Radial, pin pitch=10.00mm, diameter=11.5mm, Supercapacitor, http://www.elna.co.jp/en/capacitor/double_layer/catalog/pdf/dx_e.pdf CP Radial series Radial pin pitch 55.88mm 11W length 50mm width 9mm Capacitor C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*6.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial.

New Pull Request

Labels Milestones