synth_tools

Back

Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strip SMD 2x07 2.54mm double row Through hole angled pin header SMD 1x20 1.27mm single row style1 pin1 left Surface mounted pin header SMD 1x35 1.27mm single row (from Kicad 4.0.7), script generated Surface mounted socket strip THT 1x29 1.00mm single row male, vertical entry Harwin LTek Connector, 5 pins, pitch 5mm, size 60x10mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00078, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.0mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins LED diameter 3.0mm z-position of LED center 1.6mm, 2 pins, diameter 3.0mm, 2 pins, pitch 5mm, size 15x9.8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-404 45Degree pitch 5mm size 50x9.8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00304, 8 pins, pitch 10mm, size 35x9mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00238, 8 pins, pitch 5mm, size 20x9.8mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00291, 6 pins, pitch 5mm, size 15x9.8mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Philmore , 3 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a 1uF capacitor. 1uF may be available at http://www.thingiverse.com/thing:9095 * for a box film cap instead of latch, https://www.neutrik.com/en/product/nc3fahr2-0 A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack (T/S), https://www.neutrik.com/en/product/nj2fd-v 6.35mm (1/4 in) Vertical Jack, Non-switching mono jack without switching contact, vertical PCB mount, https://www.neutrik.com/en/product/nc3fbv2-sw B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front.

New Pull Request

Labels Milestones