synth_tools

Back

RND 205-00247, 8 pins, pitch 7.5mm, size 24.8x14mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00021, 11 pins, pitch 5mm, size 25x8.1mm^2, drill diamater 1.3mm, pad diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex LY 20 series connector, B10B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xxx-DV-A, 46 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 501920-3001, 30 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator ipc_noLead_generator.py 14-Lead Plastic DFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (2mm x 2mm) (see Linear Technology 1956f.pdf TSSOP, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T1655-2)), generated with kicad-footprint-generator JST EH series connector, BM16B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator Molex LY 20 series connector, 53398-0671 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator Hirose DF63 through hole, DF11-20DP-2DSA, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator connector wire 0.1sqmm double-strain-relief Soldered wire connection with feed through strain relief, for 2 times 1 mm² wires, reinforced insulation, conductor diameter 0.4mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00016 pitch 5mm Varistor, diameter 7mm, width 4.9mm, pitch 5mm size 21.5x15mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-309, 45Degree (cable under 45degree), 3 pins, pitch 7.5mm, size 122x14mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-16, 16 pins, pitch 5.08mm, size 55.9x10.6mm^2, drill diamater 1.4mm, pad diameter 2.6mm.

New Pull Request

Labels Milestones