Labels Milestones
Back605f29538db81c6c2eb02428332e653ea5ee7e41 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Notes from MK's PCB livestream Footprints: - avoid non-circular holes in footprints whenever possible; some fabs charge more for ovals vias connect through the board, cross at 90° to minimize distance sliders: 2mm above panel (cutting it very close, would need to glue knobs thunkicons: tight, but could also go to same bus) - run/stop 2x Pushbutton switches, all 2pin: - reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below - Glide, manual (A100k) (two left pins, from below - Glide, manual (A100k) (two left pins, from below Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below Clock rate (B100k) (not sure yet which 2 pins LED, diameter 5.0mm z-position of LED center 9.0mm, 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 2.0mm 2 pins diameter 5.0mm z-position of LED center 2.0mm, 2 pins diameter 3.0mm SMD pad as test Point, diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-106, 45Degree (cable under 45degree), 3 pins, pitch 2.54mm, size 10.6x6.2mm^2, drill diamater 1.3mm, pad diameter 2.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single.
New Pull Request