Labels Milestones
BackExternal clock. One idea: add a voltage to another voltage. Useful here for pitching up from a designated place, then offering equivalent access to copy from a base. Update readme Potentiometers: One potentiometer per step, to set output voltages. (10 One potentiometer for internal clock rate. One SPDT switch to disable clock (pause). - SPST switch per step, to indicate current step. (10 Momentary-normal-off pushbutton to manually reset. LEDs: One per step, to enable/disable gate per step. (10 - CLOCK in RESET / CASCADE out - CV Range - Once/Cont 11 Toggle Switches, 2pin: - all step switches (all go to same bus run/stop 2x Pushbutton switches, all 2pin: - step - reset in - pause in - RESET / CASCADE out - RESET / CASCADE in RESET / CASCADE in - CV out, with probably +12v gates. - Variable step count, 1-10 steps possible (with 2-3 extra switch positions to re-use for frequently-swapped positions). - External reset via socket. - External reset via socket. - External reset via socket. External reset via momentary push button. - Play continuously or play once (switch to select mode, then use manual reset (sw16 // clock in (j2/j11 // casc out (j14/j15) // reset/casc in (j1/j13) // gate out (j4/j10) .
- Diameter 14mm Electrolytic Capacitor CP, Radial series, Radial.
- WAGO 236-316, 45Degree (cable.
- (end 170.54 127.0375 (end 155.1 149.37.
- Common anode, https://docs.broadcom.com/docs/AV02-2553EN One digit.
- (https://www.silabs.com/documents/public/data-sheets/si7210-datasheet.pdf), generated with kicad-footprint-generator Samtec.