Labels Milestones
Back(AND NOT short to U2-10 Clock Rate - variable resist +6k between U2-8 and U2-9 - Reset Socket to U3-3 = capacitor measurement roughly 15nF (has a resistor as well - Once/Cont When in Cont mode shorts Casc Out normal to TP10, optional) - Casc out 2x Toggle Switches, 2pin: - all step switches (all go to same bus 2x Pushbutton switches, all 2pin: - reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below Clock rate (B100k) (not sure yet which 2 pins LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins LED diameter 3.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-2774GD(Ver.7B).pdf LED_Rectangular Rectangular Rectangular size 3.3x2.4mm^2 diameter 1.8mm, hole diameter 1.1mm, length 8.5mm, width 2.8mm, e.g. Ettinger 13.13.865, https://katalog.ettinger.de/#p=434 solder Pin_ diameter 1.0mm, hole diameter 0.7mm, length 6.5mm, width 1.8mm solder Pin_ diameter 1.0mm, hole diameter 0.7mm THT rectangular pad as test Point, diameter 4.0mm, 2 pins, pitch 2.5mm, size 13x5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00249 pitch 10.2mm size 76.2x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-412, 45Degree (cable under 45degree), 8 pins, pitch 3.5mm, size 22x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see.
- Length*width=41.5*19mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial.
- (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator Molex.