Labels Milestones
BackSize 117x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00305, 9 pins, pitch 5mm, size 30x9mm^2, drill diamater 1.5mm, 2 pads, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-14-5.08, 14 pins, pitch 7.5mm, size 39.8x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-402 45Degree pitch 5mm size 15x12.5mm^2 drill 1.4mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-4, 4 pins, pitch 3.5mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Mini-Fit Jr. Power Connectors, 42820-22XX, 2 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator Molex Sabre Power Connector, 43160-2103, With thermal vias and counter-pad, see http://www.ti.com/lit/ds/symlink/tps62177.pdf WSON 0.5 thermal vias 10-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 4mm) (see Linear Technology 1956f.pdf TSSOP, 16 Pin (https://www.onsemi.com/pub/Collateral/FUSB307B-D.PDF#page=56), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 26-60-5090, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/64L_QFN_9x9_MR_C04-00149e.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector, S8B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Molex Sabre Power Connector, 43160-2106, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator Molex PicoBlade Connector System, 53047-0210, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex LY 20 series connector, 53780-0270 (), generated with kicad-footprint-generator ipc_noLead_generator.py 8-Lead Very Thin Dual Flatpack No-Lead Package, 3x3mm Body (see Atmel Appnote 8826 64-Lead Plastic Quad Flatpack (PT) - 10x10x1 mm Body, 2.00 mm Footprint [TQFP] thermal pad TQFP64 7x7, 0.4P CASE 932BH (see ON Semiconductor 506CM.PDF DFN, 14 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with.
New Pull Request