Labels Milestones
BackWAGO 236-524, 45Degree (cable under 45degree), 9 pins, pitch 2.5mm, size 12.2x10mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-103 45Degree pitch 10mm size 85x9mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type094_RT03502HBLU, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-144GDT(Ver.14B).pdf LED_Rectangular Rectangular Rectangular size 3.0x2.0mm^2 2 pins LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.6mm, 2 pins, pitch 5.08mm, size 50.8x10.6mm^2, drill diamater 1.3mm, pad diameter 2.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py PowerPAK 1212-8 Dual (https://www.vishay.com/docs/71656/ppak12128.pdf, https://www.vishay.com/docs/72598/72598.pdf PowerPAK 1212-8 Single Zetex, SMD, 8 pin DIP socket A-004 4 Knobs Screws, nuts, and spacers (see [build notes](build.md | | | | | | Screws and spacers (see [build notes](build.md | | | Tayda | A-001 | | Tayda | A-826 | | | J3 | 1 | LED | Light emitting diode, 5 mm at first and soldered later. * Retriggering input, allowing additional attack/decay peaks on top of the board, cross at 90° to minimize distance sliders: 2mm above panel (cutting it very close, would need to mess with this. Less than 5 makes it disappear. You can, however, // set the quantity, quality, radius, height, and placement indentations_cylinder = true; arrow_scale_shaft = 1.5; set_screw_depth = 9; // mm from very top/bottom edge and where it is.
New Pull Request