Labels Milestones
BackSecond one he calls Malê Debalê but it will be very tight pushbuttons: just enough for nut, but could work with printed spacers mini toggle: 4mm above panel, ample thunkicons: probably too short without extra spacers, use mini toggle switch | | Tayda | A-1121 | | R31 | 5 | 100nF | Unpolarized capacitor | | | | | ----- | --- | ---- | ---- | | Tayda | A-3186 | | | | C10 | 1 Fireball/Fireball.kicad_pcb | 7889 Fireball/Fireball.kicad_sch | 120 Fireball/fp-info-cache | 23 .../Kosmo_Pot_Hole.kicad_mod | 17 .../PCB/precadsr_aux_Gerbers/precadsr-PTH.drl | 99 .../precadsr_aux_Gerbers/precadsr-job.gbrjob | 2 | 1nF | Film capacitor | | | | | | | | U2 | 1 | SW_Push | Push button switch, generic, separate symbols, four pins D Push button switch, generic, two pins D Momentary Switch, dual pole double throw, illuminated paddle, red and green LEDs K switch normally-open pushbutton push-button Side push button https://www.e-switch.com/system/asset/product_line/data_sheet/210/800U.pdf momentary / push-push button, h=13mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf momentary / push-push button, h=17.5mm C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf momentary / push-push button, h=17.5mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf momentary / push-push button, h=17.5mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf right angle through hole 2.25mm, height 6, Wuerth electronics 9774040951 (https://katalog.we-online.de/em/datasheet/9774040951.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-BE-LC, 35 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator Molex Panelmate series connector, S20B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 0.5 mm² wire, reinforced insulation, conductor diameter 0.65mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 2.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 1.7mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Micro-Fit 3.0 Connector System, 43045-1221 (alternative finishes: 43045-042x), 2 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator LED SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py 16-Lead Plastic TSSOP (4.4mm); Exposed Pad (see https://www.diodes.com/assets/Package-Files/SO-8EP.pdf 20-Lead Plastic Quad Flat, No Lead Package (MR) - 9x9x0.9 mm Body (see Atmel Appnote 8826.
- -7.3432 0.499373 6.98393 facet normal.
- Normal 3.036929e-01 -9.527699e-01 -3.503257e-04 vertex -9.539299e+01 9.198978e+01 3.455000e+01.
- Http://www.icbase.com/File/PDF/HKC/HKC00061008.pdf, hand-soldering, 5.0x3.2mm^2 package 14-lead dip package, row.