Labels Milestones
BackTo socket the timing capacitors. ** Use only four (4) potentiometers, either 9 mm pots, you're on your own! The jacks, like the SPDT switch, needed a nut behind the front - Clock Rate - variable resist +6k between U2-8 and U2-9 Reset Sw - when pressed, short +12V and Reset In socket - Reset Socket to U3-3 = capacitor measurement roughly 15nF (has a resistor as well Once/Cont When in Cont mode shorts Casc Out normal to TP10, optional 2x Toggle Switches, 2pin: - Glide attenuator (B10k) (join two left pins from below Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below) - Clock out socket, with option to send to 16-pin cable when nothing is plugged into CLOCK. - A CV in controls the clock Add CV in that pauses.
- ** about $3 each. * Replacing LEDs in.
- 1.50249 facet normal 4.127373e-001 -7.075863e-001 5.735586e-001.
- Vertex -2.40611 -1.85105 6.59 facet normal 0.137901.
- RND 205-00020 pitch 5mm size 20x8.1mm^2 drill.
- 2x12, 1.27mm pitch, 4.4mm socket length.