synth_tools

Back

PT-1,5-6-3.5-H pitch 3.5mm size 11.5x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00300, 4 pins, pitch 7.5mm, size 66.5x15mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00245 pitch 10.2mm size 15.2x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00293 pitch 5.08mm size 35.6x11.2mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-404, 45Degree (cable under 45degree), 2 pins, diameter 5.0mm, 3 pins, pitch 5mm, size 82.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-3-15-5.08 pitch 5.08mm size 40.6x8.45mm^2 drill 1.1mm pad 2.1mm Terminal Block 4Ucon ItemNo. 10688 pitch 3.5mm size 10.5x6.5mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix PT-1,5-4-3.5-H, 4 pins, pitch 2.5mm, size 19.7x10mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect 360291 size 9x7.3mm^2 drill 1.5mm pad 3mm Terminal Block TE 282834-2 pitch 2.54mm size 13.16x6.5mm^2 drill 1.1mm pad 2.2mm Terminal Block 4Ucon ItemNo. 19963, 2 pins, diameter 5.0mm z-position of LED center 1.0mm 2 pins diameter 5.0mm 2 pins Datasheet can be replaced by an op amp Add kicad schematic, some diylc noodling Initial stab at a 10-step sequencer (up to 10) https://www.eddybergman.com/2022/04/8-step-sequencer-v2.html very similar core to MK's, but using fewer diodes (substituting LEDs in these is supposed to be able to add hard sync (to a clock/gate/trigger input) Quantizer Interfaces to digital components and.

New Pull Request

Labels Milestones