synth_mages/synth_tools
3
1
Fork 0

Labels Milestones

Back

Leaving space for everything, lining things up more Make slider and LED footprints match current OpenSCAD model .gitignore | 1 | 2_pin_Molex_connector | KK254 Molex connector 2.54 mm spacing | Tayda | A-827 | | | | Tayda | A-3588 | | S3 | 1 README.md | 1 | 3_pin_Molex_connector | 3 | 2_pin_Molex_header | 2 pin Molex connector 2.54 mm 2x5 | | R5, R29 | 2 Hardware/Panel/precadsr-panel/sym-lib-table | 2 | 10uF | Polarized capacitor | | | | | | U2 | 1 | LED | Light emitting diode, 5 mm | | | R16, R18, R26 | 3 | 1 | SW_SPDT | SPDT miniature toggle switch ON-ON | | Tayda | A-1121 | | | | D3, D4, D5, D8, D9, D10 | 8 | 1N4148 | Standard switching diode, DO-35 | | R9, R11, R13 | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through.

  • Connector, BM14B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator Molex SlimStack.
    • New Pull Request
    0 Open 0 Closed
    Label
    Use alt + click/enter to exclude labels
    All labels No label
    Milestone
    All milestones No milestones
    Project
    All projects No project
    0 Open 0 Closed
    Label
    Clear labels
    Milestone
    No milestone
    Projects
    Clear projects