synth_tools

Back

Jiggy with PCB locator, 4 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator Mounting Hardware, inside blind hole M1.6, height 6, Wuerth electronics 9776070960 (https://katalog.we-online.com/em/datasheet/9776070960.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00085, 9 pins, pitch 10.2mm, size 86.4x8.3mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-104 45Degree pitch 5mm Varistor, diameter 7mm, width 3.5mm, pitch 5mm size 242x14mm^2 drill 1.15mm pad 3mm single screw terminal block RND 205-00076, 11 pins, pitch 3.81mm, hole diameter 1.4mm wire loop as test Point, square 2.5mm side length SMD rectangular pad as test point, pitch 5.08mm, size 10.2x8mm^2, drill diamater 1.4mm, pad diameter 2.4mm, see , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-4-5.0-H, 4 pins, pitch 5mm, size 7.3x14mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 133, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-202, 45Degree (cable under 45degree), 8 pins, pitch 5mm, size 10x10.5mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00017 pitch 5mm size 45x12.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00232 pitch 5.08mm length 4mm diameter 2mm Diode, DO-41_SOD81 series, Axial, Horizontal, pin pitch=10.16mm, , length*diameter=6.6*2.7mm^2, Vishay, IM-2, http://www.vishay.com/docs/34030/im.pdf Inductor Axial series Axial Horizontal pin pitch 45mm length 42mm diameter 35.0mm Electrolytic Capacitor CP, Axial.

New Pull Request

Labels Milestones