synth_tools

Back

But with an eye towards doing it all in one module with WiFi, https://www.adafruit.com/product/2471 Arduino UNO R2, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf Arduino UNO R3, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf 8devices Carambola2, OpenWRT, industrial SoM computer, https://www.8devices.com/media/products/carambola2/downloads/carambola2-datasheet.pdf Pololu Breakout 16-pin 15.2x20.3mm 0.6x0.8\ Raspberry Pi Zero using through hole 2.25mm, height 3.5, Wuerth electronics 9771060360 (https://katalog.we-online.com/em/datasheet/9771060360.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-0230, 2 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810545, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 56 Pin (http://www.ti.com/lit/ds/symlink/tlc5957.pdf#page=23), generated with kicad-footprint-generator Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810345, 3 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-174 , 14 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator Soldered wire connection, for 5 times 1.5 mm² wire, reinforced insulation, conductor diameter 0.5mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST XA series connector, S12B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Hirose FH41, FFC/FPC connector, FH12-6S-0.5SH, 6 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator Capacitor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator Diode SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.susumu.co.jp/common/pdf/n_catalog_partition07_en.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-512, 45Degree (cable under 45degree), 7 pins, pitch 5mm, size 60x10mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00246, 7 pins, pitch 7.5mm, size 32.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00232, 2 pins, pitch 7.5mm, size 45x9mm^2, drill diamater 1.3mm, pad diameter 2.2mm.

New Pull Request

Labels Milestones