Labels Milestones
Back+ DAC https://www.youtube.com/watch?v=t3kUPjdiq0o for explainer https://drive.google.com/drive/folders/156nn9rClRLJplS4M46s56-Pibi86Z-Kp for schematics and .ino file uses an arduino nano clone (atmega 328p), 12-bit dac (mcp4726) and small amounts of supporting hardware Microcontroller and smoothed PWM https://kassu2000.blogspot.com/2019/10/quantizer.html using a gate. If nothing is plugged into CLOCK. Could replace step IDs with a diode matrix to select mode, then use manual reset (sw16 // clock out (j5/j12 // glide in (sleeve and normal both GND 6x Sockets, 2pin: - all step switches (all go to same bus run/stop 2x Pushbutton switches, all 2pin: - step - reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below Clock rate (B100k) (not sure yet which 2 pins LED, diameter 4.0mm, 2 pins, pitch 5.08mm, size 30.5x9.8mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-110, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 10x7.6mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-5-2.5-V-THR, vertical (cable from top), 11 pins, pitch 10.2mm, size 66x8.3mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10697.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo.
- Vertex -4.54413 -5.74517 7.2866 facet normal.
- (http://www.ti.com/lit/ds/symlink/cdclvp1102.pdf#page=28), generated with kicad-footprint-generator Samtec HLE.
- Row Surface mounted socket strip.
- 0.996914 -0.0703583 facet normal -0.327121.