Labels Milestones
BackMain synth_tools/RadioShaek2Board.diy 5515 lines 2bd01a1ff2 Add schematic, start on PCB Added input resistor for sync; placed everything on PCB choices could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. *** Expensive, about $3 each. * Replacing LEDs in these is supposed to be able to add glide checkpoint before trying to fit in glide controls More mounting hole 6.4mm m6 din965 Mounting Hole 2.2mm, no annular, M2, ISO7380 mounting hole 2.7mm m2.5 Mounting Hole 6.4mm, M6, ISO14580 mounting hole 4.3x6.2mm m4 Mounting Hole 6.4mm, no annular, M3 mounting hole 2.7mm m2.5 iso14580 Mounting Hole 5.3mm, M5, ISO7380 mounting hole 6.4mm m6 iso14580 Mounting Hole 6.5mm, no annular m2 iso7380 Mounting Hole 6.4mm, M6, DIN965 mounting hole 5.3mm no annular mounting hole 2.2mm m2 Mounting Hole 2.7mm, M2.5 mounting hole position tweaks Messing around with panel title fonts From aa85775b4759021aae3f9b898bf346f9066d11e7 Mon Sep 17 00:00:00 2001 Subject: [PATCH] SVG decontamination Hardware/Panel/precadsr_panel.svg | 4 README.md | 5 | 100nF | Unpolarized capacitor | | | U2 | 1 | SW_SPDT | SPDT miniature toggle switch - 9.5mm, +5mm extra space - micro toggle switch ON-ON | | | R14, R15, R18 | 3 | A1M | Potentiometer | | | | Tayda | A-1157 or A-2425 | | R8, R10, R12 | 3 | A1M | Potentiometer | | | | | | | J3, J4, J5 | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | | J12 | 1 | 2_pin_Molex_header | 2 f63cfba954 Go to file d5bfb6e27b 's notes on repique/caixa, two or three for surdos