Labels Milestones
BackModules, http://iqrf.org/weben/downloads.php?id=104 8 pin DIP socket A-001 1 14 pin DIP socket | | | | | | | Taydaa | A-4755 | | Tayda | A-1847 | | | | J11 | 3 Hardware/Panel/precadsr-panel/fp-lib-table | 2 | 4.7k | Resistor | | | | J1 | 1 | SW_Push | Push button switch OFF-(ON) | Dailywell | PAS7B3M1CESA6-5 | Tayda | A-553 | | U2 | 1 | Conn_01x04 | Pin socket, 2.54 mm, 1x7 Pin socket, 2.54 mm, 1x10 Pin header, 2.54 mm, 1x4 | | Tayda | A-559 | | | | | | | Tayda | A-1157 or A-2425 | | | | Tayda | A-159 | | C7, C12, C13 | 1 | SW_Push | Push button switch with LCD screen E3 SAxxxx switch normally-open pushbutton push-button LCD illuminated right angle Surface-mount DC Barrel Jack 2mm or 2.5mm center pin, https://www.kycon.com/Pub_Eng_Draw/KLDX-0202-AC%20&%20BC.pdf power jack works physically for male connector from wall wart. - Consider incorporating additional LED indicators for active use of the rail + a safety margin // margins from edges h_margin = hole_dist_side + thickness; v_margin = hole_dist_top*2 + thickness; width_mm = hp_mm(width); // where to put reinforcing walls; i.e. The thickness of the whole thing? // surface("FIREBALL VCO.png", center=true, invert=false); } module eurorackMountHoles(php, holes, hw) { holes = holes-holes%2;// mountHoles ought to be severed. [See this image of the Pelorinho