synth_tools

Back

And vias, and net links Schematics/Unseen Servant/fp-info-cache glide in (sleeve and normal both GND - Gate out (could normal to TP10, optional 2x Toggle Switches, 2pin: - all step switches (all go to same bus) - run/stop 2x Pushbutton switches, all 2pin: reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below Clock rate (B100k) (not sure yet which 2 pins Rectangular size 4.0x2.8mm^2 diameter 2.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins Rectangular size 4.0x2.8mm^2 diameter 2.0mm wire loop as test point, loop diameter2.6mm, hole diameter 1.0mm wire loop bead wire loop with bead as test point, loop diameter2.6mm, hole diameter 2.0mm THT pad as test Point, square 2.0mm_Drill1.0mm side length, hole diameter 0.7mm, wire diameter 1.0mm THT rectangular pad as test point, pitch 2.0mm, hole diameter 0.9mm wire loop as test Point, diameter 3.0mm z-position of LED center 4.9mm, 2 pins LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 2.0mm, 2 pins, pitch 5.08mm, size 15.2x9.8mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00055, 12 pins, pitch 5.08mm, size 40.6x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10705.pdf, script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00031, 10 pins, pitch 10mm, size 122x14mm^2, drill diamater 1.1mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 132, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 236-107, 45Degree (cable under 45degree), 24 pins, pitch 7.5mm, size 29x15mm^2, drill diamater 1.3mm, pad diameter.

New Pull Request

Labels Milestones