synth_tools

Back

Angle Surface-mount DC Barrel Jack, 2.0mm ID, 5.5mm OD, 24V, 8A, no switch, https://www.cui.com/product/resource/pj-063ah.pdf barrel jack connector (5.5 mm outer diameter, generated with kicad-footprint-generator Molex PicoBlade series connector, S11B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator Mounting Hardware, inside blind hole M1.6, height 3, Wuerth electronics 9774020982 (https://katalog.we-online.de/em/datasheet/9774020982.pdf), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-170 , 10 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator Molex LY 20 series connector, S4B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py 32-lead plastic TSOP; Type II TSOP-II, 44 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/39935c.pdf#page=152), generated with kicad-footprint-generator Mounting Hardware, inside through hole M2, height 2.5, Wuerth electronics 9774090360 (https://katalog.we-online.de/em/datasheet/9774090360.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 36 Pin (http://www.ti.com/lit/ds/slvsba5d/slvsba5d.pdf#page=35), generated with kicad-footprint-generator Hirose series connector, BM02B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator Soldered wire connection, for 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection, for 6 times 0.25 mm² wires, reinforced insulation, conductor diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/19965.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-103, 45Degree (cable under 45degree), 12 pins, pitch 5.08mm, size 40.6x11.2mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-409, 45Degree (cable under 45degree), 8 pins, pitch 5.08mm, size 35.6x10.6mm^2, drill diamater 1.15mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type101_RT01604HBWC, 4 pins, pitch 5mm, size 35x7.6mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00302, 6 pins, pitch 5.08mm, hole diameter 0.7mm THT rectangular pad as test Point, diameter 1.5mm SMD pad as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00048, 5 pins, pitch 2.5mm, size.

X="4.8" y="2.0"/>

New Pull Request

Labels Milestones