synth_tools

Back

Http://www.ti.com/lit/ds/symlink/lm4755.pdf D2PAK DDPAK TO-263 D2PAK-3 TO-263-3 SOT-404 TO-263 / D2PAK / DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-5-11/ TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-5-11/ TO-263/D2PAK/DDPAK SMD package, http://www.onsemi.com/pub/Collateral/ENA2192-D.PDF Analog Devices KS-4, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/sc70ks/ks_4.pdf Analog Devices (Linear Tech), 133-pin LGA uModule, 15.0x15.0x4.32mm, https://www.analog.com/media/en/technical-documentation/data-sheets/4637fc.pdf NXP LGA, 8 Pin (https://www.renesas.com/eu/en/www/doc/datasheet/hip2100.pdf#page=13), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV-LC, 43 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 0.127 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Pico-Lock series connector, B2P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0804, 80 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator Molex Nano-Fit Power Connectors, 42819-52XX, With thermal vias in pads, 3 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV-A, 48 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator Molex Sabre Power Connector, 43160-0102, With thermal vias in pads, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py 16-Lead Ultra Thin Quad Flatpack (PT) - 12x12x1 mm Body, 2.00 mm Footprint [HTQFP] thermal pad HTSSOP32: plastic thin shrink small outline package; 28 leads; body width 3 mm; (see NXP sot054_po.pdf TO-92 leads molded, narrow, drill 0.75mm, hand-soldering variant with enlarged pads (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf TO-92L Molded Narrow transistor TO-92L Molded Narrow transistor TO-92L Molded Wide transistor TO-92Mini package, drill 0.75mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot556-1_po.pdf 24-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (2mm x 2mm) (see Linear Technology DFN_8_05-08-1718.pdf DFN, 8 Pin (http://www.st.com/resource/en/datasheet/pm8834.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector, S2B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV-BE-LC, 49 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-0810, 8 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator Soldered wire connection, for 5 times 0.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3.5mm, size 14x6.5mm^2, drill diamater 1.4mm, pad diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex CLIK-Mate series connector, 202396-1107 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py 8-pin SOT-23 package, Handsoldering, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/sot-23rj/rj_8.pdf SOT-143R, reverse pinning, https://www.nxp.com/docs/en/package-information/SOT143R.pdf SOT-143R, reverse pinning, Handsoldering, https://www.nxp.com/docs/en/package-information/SOT143R.pdf module CMS SOT223 8 pins.

New Pull Request

Labels Milestones