Labels Milestones
BackImages/IMG_6753.JPG **Untested hardware and software — Do not connect the Normal pin for op amp Fix floating pin for Pause (J19/J18); the schematic and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fbv1 B Series, 3 pole female XLR receptacle, grounding: ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbv1-da B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral left PCB mount, retention spring, no latch, https://www.neutrik.com/en/product/nc3fbv1-0 B Series, 5 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5fbh B Series, 3 pole male XLR receptacle, grounding: ground contact to mating connector shell and front panel, vertical PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.00u, http://matias.ca/switches/ Matias ALPS keyswitch 1.75u plate Cherry MX keyswitch 2.25u plate Cherry MX keyswitch, 2.00u, http://matias.ca/switches/ Matias ALPS keyswitch 1.75u Matias/ALPS keyswitch, 1.25u, http://matias.ca/switches/ Matias ALPS keyswitch 6.25u Matias/ALPS keyswitch, 2.75u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 1.25u PCB Cherry MX keyswitch 1.75u PCB Cherry MX keyswitch, 2.25u, PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc5fav-da A Series, 5 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fi-v Combo I series, 3 pole male XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fah-0 A Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/ncj6fa-v-da Combo A series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel: 9.8mm (alpha pots sliders: 3mm above panel, tight but possible mini toggle: 4mm above panel, ample thunkicons: probably too tight; could work with printed spacers mini toggle: 4mm above panel, tight but possible mini toggle: 2.5mm above panel, ample thunkicons: probably too tight.
New Pull Request