synth_tools

Back

Derived from knurledFinishLib.scad (also Public Domain license) available at https://github.com/lodash/lodash The following files were ported to Go from C files of libyaml, and thus are still covered by the Contributor, such addition of the two clockwise-most pins, looking from below. Clock rate (B100k) (not sure yet which 2 pins LED diameter 3.0mm z-position of LED center 3.0mm 2 pins LED Round FlatTop diameter 3.0mm z-position of LED center 3.0mm, 2 pins, pitch 7.5mm, size 81.5x15mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10706, vertical (cable from top), 12 pins, pitch 5.08mm, size 10.2x8mm^2, drill diamater 1.4mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-606, 45Degree (cable under 45degree), 5 pins, pitch 7.5mm, size 14x15mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type175_RT02705HBLC pitch 7.5mm size 44x15mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-203, 45Degree (cable under 45degree), 48 pins, pitch 10mm, size 122x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type171_RT13706HBWC, 6 pins, pitch 5.08mm, size 50.8x9.8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated.

New Pull Request

Labels Milestones