Labels Milestones
Back3x3x0.5 mm Body [QFN] (see datasheet at http://www.cypress.com/file/138911/download and app note at http://www.cypress.com/file/140006/download DFN, 6 Pin (https://www.silabs.com/documents/public/data-sheets/Si7020-A20.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py LFCSP, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8209-8-bit%20AVR%20ATmega16M1-32M1-64M1_Datasheet.pdf#page=426), generated with kicad-footprint-generator Hirose DF11 through hole, DF63R-4P-3.96DSA, 4 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SSOP18: plastic shrink small outline package; 10 leads; body width 4.4 mm; (see NXP sot054_po.pdf to-92 sc-43 sc-43a sot54 PA33 diode SOD70 2-pin TO-92 horizontal, leads molded, wide, drill 0.75mm (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf TO-92L Molded Wide transistor TO-92Mini package, drill 0.75mm (https://www.diodes.com/assets/Package-Files/TO92S%20(Type%20B).pdf TO-92S_Wide package, drill 0.75mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot158-1_po.pdf VSO56: plastic very small outline 7,5mm long https://toshiba.semicon-storage.com/info/docget.jsp?did=53548&prodName=TLP2770 6-Lead Plastic DFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 4mm) (see Linear Technology 1956f.pdf TSSOP, 16 Pin (https://www.onsemi.com/pub/Collateral/FUSB307B-D.PDF#page=56), generated with kicad-footprint-generator Soldered wire connection, for 4 times 0.15 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 1.5mm, hole diameter 2.0mm 2 pins diameter 3.0mm z-position of LED center 1.0mm 2 pins LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins IR-ED, diameter 3.0mm, 2 pins, pitch 5mm, size 60x9.8mm^2, drill diamater 1.5mm, 2 pads, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-316, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 82.3x14mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-3-2.5-V-THR, vertical (cable from top.
New Pull Request