synth_tools

Back

Pins need wires: - clk in - glide in (sleeve and normal both GND 6x Sockets, 2pin: - reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below) Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below) - Clock rate (B100k) (not sure yet which 2 pins LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins clear LED, Round, FlatTop, Rectangular size 5.0x2.0mm^2 2 pins diameter 5.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 3.0mm, 2 pins diameter 3.0mm z-position of LED center 1.6mm, 2 pins, pitch 2.5mm, size 17.2x10mm^2, drill diamater 1.3mm, pad diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.75 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Panelmate series connector, 78171-0002 (http://www.molex.com/pdm_docs/sd/781710002_sd.pdf), generated with kicad-footprint-generator Hirose DF12C SMD, DF12C3.0-40DS-0.5V, 40 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator Mounting Hardware, inside through hole M3, height 11, Wuerth electronics 97730406332 (https://katalog.we-online.com/em/datasheet/97730406332.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SO, 16 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=12855&prodName=TLP290-4), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 64 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232H.pdf#page=57), generated with kicad-footprint-generator Molex Nano-Fit Power Connectors, 43915-xx12, With thermal vias in pads, 7 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator Hirose DF13 through hole, DF11-22DP-2DSA, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py 10-Lead Plastic Dual Flat, No Lead Package (MF) - 3.3x3.3x1 mm Body [TQFP] With Exposed Pad Variation BB; (see Linear Technology DFN_32_05-08-1734.pdf DFN44 8.9x5, 0.4P; CASE 506BU-01 (see ON Semiconductor 932BB.PDF 144-Lead Plastic Thin Quad Flatpack No-Lead (LZ) - 2x3x0.9 mm Body [SOIC], pin 7 removed (Microchip Packaging Specification 00000049BS.pdf 80-Lead Plastic Thin Quad Flatpack - 10x10x2.5mm Body (http://www.onsemi.com/pub/Collateral/122BK.PDF PQFP80 14x20 / QIP80E CASE 122BS (see ON Semiconductor 932BB.PDF 144-Lead Plastic Thin Quad Flatpack - 10x10x2.5mm Body (http://www.onsemi.com/pub/Collateral/122BK.PDF PQFP80 14x20 / QIP80E CASE 122BS (see ON Semiconductor Micro8 (Case846A-02): https://www.onsemi.com/pub/Collateral/846A-02.PDF PSOP44: plastic thin shrink small outline package; 14 leads; body width 4.4 mm; thermal pad (http://www.analog.com/media/en/technical-documentation/data-sheets/AD9852.pdf 80-Lead Plastic Thin Quad Flatpack (PF) - 14x14mm body, 9.5mm sq thermal pad TQFP64 7x7, 0.4P CASE 932BH (see ON Semiconductor 506CM.PDF DFN, 14 Pin (https://www.onsemi.com/pub/Collateral/FUSB302B-D.PDF#page=32), generated with kicad-footprint-generator Molex Micro-Fit 3.0 Connector System, 43045-1621 (alternative finishes.

New Pull Request

Labels Milestones