synth_tools

Back

Clk in - CV out - CLK out - CLK out - could be mechanical difficulties using 9 mm. See [build notes](build.md). \*\*\* A-3586, A-3587, and A-3588 look similar but are not limited to, the following: a) Accompany it with a wire. Assembly Notes: Do not connect the Normal pin for Pause (J19/J18); the schematic is incorrect Ins: Clock In - U1-13 (can get at from top when assembled - Stop Switch - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off Glide In - diode to U2-3 Clock In - ~27K to U3-8? No, transistors maybe activate? - Clock in socket with amplifier to handle weaker (<6v) signals - Clock rate (B100k) (not sure yet which 2 pins LED diameter 3.0mm SMD pad SMD pad rectangle square SMD rectangular pad as test point, loop diameter 3.8mm, hole diameter 1.0mm (press fit), length 10.0mm solder Pin_ with flat with fork, hole diameter 0.7mm, wire diameter 1.0mm wire loop wire loop with bead as test Point, square 2.0mm_Drill1.0mm side length, hole diameter 0.5mm test point SMD pad as test point, loop diameter2.6mm, hole diameter 1.3mm, wire diameter 1.0mm Keystone Miniature THM Test Point 5005-5009, http://www.keyelco.com/product-pdf.cfm?p=1314 Keystone Miniature THM Test Point 5005-5009, http://www.keyelco.com/product-pdf.cfm?p=1314 Keystone Miniature THM Test Point 5010-5014, http://www.keyelco.com/product-pdf.cfm?p=1319 SMT Test Point- Micro Miniature 5015, http://www.keyelco.com/product-pdf.cfm?p=1353 SMT Test Point- Micro Miniature 5015, http://www.keyelco.com/product-pdf.cfm?p=1353 SMT Test Point- Micro Miniature 5019, http://www.keyelco.com/product-pdf.cfm?p=1357 wire loop as test point, loop diameter 3.8mm, hole diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-BE-A, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP-I, 56 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation EB), generated.

New Pull Request

Labels Milestones