Labels Milestones
Back| SW_DPDT_x2 | Switch, triple pole double throw | | | | Tayda | A-804 | | | | | | R9 | 1 | 10nF | Unpolarized capacitor | | | | Tayda | A-3545, A-3489, or A-3499\*\*\* | | Tayda | A-804 | | | Tayda | A-001 | | R1, R10, R11 | 3 | A1M | \*\*Potentiometer, 9 mm pots, you're on your own! * The jacks, like the SPDT switch, needed a nut behind the front Don't put R8 so close to R26 -- D36/R47 too close Testing before powering up: Clock In - U1-13 (can get at from top when assembled Stop Switch - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off - Single Step - 12V through 10k Ohms to U-1-14, more like 1M when off Glide In - U1-13 (can get at from top when assembled - Stop Switch - 10 - center_adjust; center_col = width_mm/2; vertical_space = height - v_margin - title_font; saw_out = [output_column, row_2, 0]; pwm_in = [first_col, fourth_row, 0]; triangle_out = [output_column, row_2, 0]; pwm_in = [input_column - h_margin/2, bottom_row, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_2, 0]; audio_in_2 = [left_col, row_7, 0]; cv_in_1b = [right_col, row_2, 0]; fm_in = [input_column + h_margin/2, row_1.
New Pull Request