synth_tools

Back

0]; audio_in_2 = [left_col, row_1, 0]; pwm_in = [input_column + h_margin/2, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, row_1, 0]; pwm_in = [width_mm - h_margin - working_width/8, row_3, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_4, 0]; pwm_cv_lvl = [second_col, second_row, 0]; //Third row interface placement sync_in = [first_col, fourth_row, 0]; //Fifth row interface placement triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; fm_in = [first_col, fifth_row, 0]; square_out = [width_mm-h_margin, row_1, 0]; fm_pot = [input_column - h_margin/2, row_1, 0]; left_rib_x = thickness * 1; right_rib_x = width_mm - thickness*2; // draw panel, subtract holes union() { difference(){ color([.1,.1,.1]) panel(width); //module title(string, size=9, halign="center", font="Futura XBlk BT:style=Extra Black"; // waves out // RESET in // GATE out - CLK out - could be done at the center, then to point out // round shaft hole cylinder(r=shaft_radius,h=shaft_height, $fn=shaft_smoothness); if(shaft_is_flatted == true } module knurled_finish(ord, ird, lf, sh, fn, rn [ ord*cos(lf2), ord*sin(lf2), h0], [ ird*cos(lf0), ird*sin(lf0), h1], [ ord*cos(lf0), ord*sin(lf0), h2], [ ord*cos(lf2), ord*sin(lf2), h0], [ ird*cos(lf1), ird*sin(lf1), h2], [ ord*cos(lf2), ord*sin(lf2), h2] echo(" Knurled Surface Library v2 "); echo(" knurl_hg - [ 12 ] ,, Knurl's Height. "); echo(" knurl_dp - [ 2 ] ,, Bevel's Height at the time of the stem. [mm] stem_transition_radius = 8.8; /* [Setscrew Hole (optional)] */ // Four hole threshold (HP h_margin = hole_dist_side*4; v_margin = hole_dist_top*5; width_mm = 70.8; // 14HP×5.08mm = 71.12; ES for 14HP is 70.8 first_row = 25.65; //mm second_row = 47.25; //mm third_row = 65.75; //mm fourth_row = 88.25; //mm fifth_row = 108.75; //mm // Center two holes hole_r = 1.7; // Hole radius (mm // Horizontal pitch size (mm HP = 5.07; // 5.07 for a single 1 mm² wires.

New Pull Request

Labels Milestones