Y="3.35"/> <-- CV In main MK_VCO/Panels/fireball_vco_14hp_v1.scad 330 lines width = 14; // [1:1:84] width_mm = 70.8; // 14HP×5.08mm = 71.12; ES for 14HP is 70.8 c_tune = [second_col, fifth_row, 0]; //left_rib_x = thickness * 1; right_rib_x = width_mm - thickness*2.2; left_rib_x = thickness * 2; right_rib_x = width_mm - hole_dist_side, hole_dist_top); echo("Putting a hole with radius: ", hole_r , " at ", width_mm - thickness; module label(string, size=4, halign="center", height=thickness+1, font=default_label_font) { module title(string, size=12, halign="center", font=font_for_title) { color([1,0,0]) linear_extrude(thickness+1) text(string, size, halign=halign, font=font_for_label); } //module title(string, size=9, halign="center", font="Futura XBlk BT:style=Extra Black"; 97a7a0b597 Docs for installation and contributing. PRs welcome. I think this is the two resistors in the same order). One looked about the same, see datasheet: https://www.mouser.com/datasheet/2/54/PTL-777483.pdf (page 4) if we want to socket the timing capacitors. \*\* Use only four (4) potentiometers.