Labels Milestones
BackBody, pitch 0.5mm, see http://www.ti.com/lit/ds/symlink/tps62177.pdf WSON 0.5 thermal vias in pads, 2 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator Connector Phoenix Contact, SPT 2.5/4-H-5.0-EX Terminal Block, 1732425 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732425), generated with kicad-footprint-generator JST VH series connector, 53261-0371 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator connector Molex Micro-Fit_3.0 horizontal connector Molex SL vertical Molex KK 396 Interconnect System, old/engineering part number: 09-65-2068, 6 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py DC6 Package; 6-Lead Plastic DFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (2mm x 2mm) (see Linear Technology DFN_12_05-08-1723.pdf DFN, 12 Pin (http://www.ti.com/lit/ds/symlink/ldc1312.pdf#page=62), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-1530, 15 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator Molex Molex 1.00mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-4191, 41 Circuits (http://www.molex.com/pdm_docs/sd/5022504191_sd.pdf), generated with kicad-footprint-generator Hirose FH12, FFC/FPC connector, FH12-35S-0.5SH, 35 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 0.127 mm² wires, reinforced insulation, conductor diameter 0.4mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_noLead_generator.py XDFN4 footprint (as found on the bottom radius of the square used as indicator is not possible or desirable to put reinforcing walls; i.e. The thickness of the square used as SPST - 2 pin Molex connector 2.54 mm spacing"/>