synth_tools

Back

Ipc_noLead_generator.py DDB Package; 10-Lead Plastic Dual Flat, No Lead Package (MD) - 4x4x0.9 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf 48-Lead Thin Quad Flatpack (MW) - 10x10x1.0 mm Body [LFCSP]; (see https://www.intersil.com/content/dam/Intersil/documents/l72_/l72.10x10c.pdf LFCSP VQ, 48 pin, exposed pad: 4.5x8.1mm, with thermal vias; see section 6.6 of http://www.st.com/resource/en/datasheet/DM00273119.pdf X1-WLB0909, 0.89x0.89mm, 4 Ball, 2x2 Layout, 0.35mm Pitch, https://www.st.com/resource/en/datasheet/stm32h725vg.pdf ST WLCSP-115, ST die ID 480, 4.57x4.37mm, 132 Ball, 12x11 Layout, 0.35mm Pitch, https://www.onsemi.com/pdf/datasheet/ncp163-d.pdf#page=23 6pin Pitch 0.4mm 8-Lead Plastic DFN (2mm x 2mm) (see Linear Technology DFN_16_05-08-1709.pdf DHC Package; 18-Lead Plastic DFN (4mm x 4mm) (see Linear Technology 05081955_0_DHC18.pdf DHD Package; 18-Lead Plastic DFN (3mm x 2mm) (see Linear Technology DFN_8_05-08-1702.pdf 8-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 3mm) (see Linear Technology 05081733_A_DF12.pdf DFN12, 4x4, 0.65P; CASE 506CE (see ON Semiconductor Micro8 (Case846A-02): https://www.onsemi.com/pub/Collateral/846A-02.PDF PSOP44: plastic thin shrink small outline package; 20 leads; body width 5.3 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot505-1_po.pdf TSSOP, 8 Pin (http://www.ti.com/lit/ds/symlink/lp2951.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py 16-Lead Ultra Thin Quad Flatpack - 10x10x2.5mm Body (http://www.onsemi.com/pub/Collateral/122BK.PDF PQFP80 14x20 / QIP80E CASE 122BS (see ON Semiconductor 506AF.PDF DKD Package; 24-Lead Plastic QFN (4mm x 4mm) (see Linear Technology 1956f.pdf TSSOP, 16 Pin (http://www.ti.com/lit/ds/symlink/cdclvp1102.pdf#page=28), generated with kicad-footprint-generator Molex Pico-EZmate series connector, B13B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py 64-Lead Plastic Quad Flatpack (PT) - 12x12x1 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf 44-Lead Plastic Shrink Small Outline (SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true SSO Stretched SO SOIC Pitch 2.54 SSO Stretched SO SOIC 1.27 SSO, 7 Pin (https://b2b-api.panasonic.eu/file_stream/pids/fileversion/2787), generated with kicad-footprint-generator Harting har-flexicon series connector, SM04B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 0.75 mm² wire, basic insulation, conductor diameter 0.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Hirose DF63 through hole, DF11-26DP-2DSA, 13 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator JST EH series connector, S10B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 0.25 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.5 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact.

New Pull Request

Labels Milestones