synth_tools

Back

The version of the rhythm: "lite", normal, and normal both GND) 6x Sockets, 2pin: - reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below Clock POT is too small for film; is film needed? From cb59d1e9c06865f5bebe8c7ee0afa4859e0766b2 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Submodules, improved NPTH Hardware/lib/Kosmo_panel | 1 | TL074 | Quad Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8/TSSOP-8/VSSOP-8 Small Signal NPN Transistor, TO-92 | | | S1 | 1 | Conn_01x10 | Pin socket, 2.54 mm, 1x4 Pin header, 2.54 mm, 1x10 Pin header, 2.54 mm, 1x2 (see build notes) 1 SIP socket, 2.54 mm, 1x4 | | | C3 | 1 | Conn_01x07 | *(optional) SIP socket, 2.54 mm, 1x7 | | Tayda | A-159 | | | R14, R15, R18 | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS) | | R24, R26, R28 | 3 | 1k | Resistor | | R1, R10, R11 | 3 | 1k | Resistor | | J8 | 1 | SW_3PDT_x3 | 3PDT miniature toggle switch ON-ON | | J10 | 1 | 10nF | Unpolarized capacitor | | | J7 | 1 | LED | Light emitting diode Push button switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm tact sw push PVA2 DPDT momentary / push-push button, h=23mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf right angle DPDT push button https://www.e-switch.com/system/asset/product_line/data_sheet/210/800U.pdf CuK miniature slide switch, EG series, DPDT, right angle, http://www.ckswitches.com/media/1422/js.pdf CuK miniature slide switch, EG series, SPDT, right angle.

New Pull Request

Labels Milestones