synth_tools

Back

33.3mm 37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, distance of mounting holes to 5mm + unplated, and revises jack footprint 2537badf2888da8d57706bf8be36ba8f10d4993a gets comfier with gitignore and git rm --cache corrects inexplicably begreebled lower thre knob labels; confirms mask color is as defined by the Open Source Hardware Logo Polarity Logo, Center Negative Logo Polarity Logo, Center Negative Polarity Logo, Center Positive Restriction of Hazardous Substances Directive Logo Symbol, Attention, Copper Top, Big, Symbol, CC-Share Alike, Copper Top, Big, Symbol, Danger, CopperTop, Big, Symbol, CC-Public Domain, Copper Top, Small, Symbol, CC-PublicDomain, Copper Top, Small, GNU-Logo, GNU-Head, GNU-Kopf, Silkscreen, Symbol, HighVoltage, Type2, Copper Top, Small, Symbol, Highvoltage, Type 2, Gauge Massstab 50mm CopperTop Type 1 Gauge, Massstab, 50mm, CopperTop, Type 2, Big, Symbol, GNU-GPL, Copper Top, Small, Waste Electrical and Electronic Equipment Directive Altech AK300 terminal block, pitch 5.08mm, size 55.9x11.2mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=345), generated with kicad-footprint-generator JST ZE series connector, SM13B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator connector wire 1sqmm strain-relief Soldered wire connection with double feed through strain relief, for 4 times 0.127 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block pitch 5.0mm Wuerth WR-TBL Series 3114 terminal block RND 205-00032 pitch 10mm size 42.3x14mm^2 drill 1.15mm pad 3mm single screw terminal block RND 205-00002, 3 pins, pitch 10.2mm, size 96.5x8.3mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-9, 9 pins, pitch 10mm, size 162x14mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-105 45Degree pitch 5mm Varistor, diameter 21.5mm, width 4.3mm, pitch 5mm size 25x10.5mm^2 drill 1.4mm pad 2.7mm terminal block Metz Connect Type171_RT13704HBWC pitch 7.5mm Varistor, diameter 21.5mm, width 4.6mm, pitch 7.5mm size 30x11mm^2 drill 1.4mm pad 2.6mm Terminal Block WAGO 236-109, 45Degree (cable under 45degree), 24 pins, pitch 3.5mm, size 49.7x7mm^2, drill diamater 1.2mm, pad diameter 2.7mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend.

New Pull Request

Labels Milestones