synth_tools

Back

Pitch 22.90mm diameter 25.4mm Vishay TJ5 L_Toroid, Horizontal series, Radial, pin pitch=27.00mm, , length*width=32*15mm^2, Capacitor C Radial series Radial pin pitch 35mm length 29mm diameter 10mm height 20mm Non-Polar Electrolytic Capacitor CP, Radial series, Radial, pin pitch=15.80mm, , length*width=41.9*19.1mm^2, Vishay, TJ7, http://www.vishay.com/docs/34079/tj.pdf L_Toroid Vertical series Radial pin pitch 5.00mm length 7.2mm width 3.5mm solder Pin_ diameter 1.0mm, hole diameter 0.7mm THT rectangular pad as test Point, square 2.0mm side length test point wire loop as test Point, square 4.0mm side length SMD rectangular pad as test Point, diameter 5.0mm z-position of LED center 2.0mm, 2 pins, pitch 5mm, size 21.5x15mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10689, 12 pins, pitch 5mm, size 20x8mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-224, 45Degree (cable under 45degree), 9 pins, pitch 3.5mm, size 32.5x8.3mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block TE 282834-5, 5 pins, pitch 6.35mm, size 12.7x12.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect 360425 size 9x9mm^2 drill 1.6mm pad 3.2mm terminal block RND 205-00087 vertical pitch 3.5mm size 42x7.6mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MPT-0,5-4-2.54, 4 pins, pitch 2.54mm, size 15.7x6.2mm^2, drill diamater 1.3mm, pad diameter 2mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 0.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT.

New Pull Request

Labels Milestones