Labels Milestones
BackHttps://www.neutrik.com/en/product/nc3mbv-e B Series, 5 pole female XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nl4md-v-2 speakON Chassis Connectors, 2 pole chassis connector, nickel metal square G-size flange, self tapping screw holes (A-screw), horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc5fav-da A Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 2.00u plate Cherry MX keyswitch, 2.00u, http://matias.ca/switches/ Matias ALPS keyswitch 1.75u plate Cherry MX keyswitch 2.00u vertical PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 2.00u, vertical, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.50u, PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faah-0 AA Series, 3 pole male XLR receptacle, grounding: without ground / shell contact, lateral left PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 1.00u PCB Cherry MX keyswitch 1.75u PCB Cherry MX keyswitch, ISO Enter, PCB mount, https://www.neutrik.com/en/product/nc3mav B Series, 4 pole male XLR receptacle, grounding: separate ground contact connected to shell ground, but not to front panel and pcb into different files Altech AK300 terminal block, pitch 5.08mm, size 25.4x10.6mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-308, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 80x9.8mm^2, drill diamater 1.3mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-8, 8 pins, pitch 5.08mm, size 30.5x8mm^2, drill diamater 1.6mm, 4 pads, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-508 45Degree pitch 7.5mm Varistor, diameter 9mm, width 4.8mm, pitch 7.5mm size 69.8x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MKDS-1,5-8-5.08 pitch 5.08mm length 9mm width 5.7mm Capacitor C, Rect series, Radial, pin pitch=6.00*6.00mm^2, , length*width=11.5*11.5mm^2, Neosid, NE-CPB-11EN, Drill1.3mm, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_NE_CPB11EN.pdf Inductor Radial series Radial pin pitch 10.00mm diameter 8mm width 2.5mm Capacitor C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*6.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 12.7mm length 5.2mm diameter 2.7mm Diode, DO-15 series, Axial, Horizontal, pin pitch=10.16mm, 15W, length*width*height=48*12.5*12.5mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf Resistor Axial_Power series.
- 16mm Non-Polar Electrolytic Capacitor CP Radial.
- Normal -9.996061e-01 -2.805505e-02 7.297994e-04 facet normal 0.622319 -0.730673.
-
Left edge centeris at (50,150). Note
y. - Radio Shaek 2 * nothing, shafthole_height + 2.
- 47.3x14mm^2 drill 1.15mm pad 3mm Terminal Block.