Labels Milestones
Back| A-001 | | | | | | J1 | 1 Kosmo_panel | 1 | SW_Push | Push button switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=4.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=4.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=4.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tact sw push 6mm tactile push button, 6x6mm e.g. PHAP33xx series, height=4.3mm tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=13mm FS5700 series pushbutton footswitch, DPDT, https://www.e-switch.com/system/asset/product_line/data_sheet/226/FS5700.pdf Switch with LCD screen K switch dp3t ON-ON-ON D Switch, three position, dual pole double throw | | | | U2 | 1 | SW_DPDT_x2 | Switch, single pole double throw, separate symbols K switch single-pole double-throw spdt ON-ON D Push button switch, normally open, two pins, 45° tilted D Momentary Switch, single pole double throw, illuminated paddle, http://www.nkkswitches.com/pdf/gwillum.pdf switch single-pole double-throw spdt ON-ON D Screw terminal, single row, 01x03 D 2x5 pin shrouded header 2.54 mm spacing | | | | | R3, R7 | 2 | 1N5817 | Schottky diode | | | | | R31 | 5 If we expect or plan on developing modules which use the two RENDER hooks. * These work in progress; better README to come soon. Meanwhile: **Untested hardware and software — Do not connect the Normal pin for op amp style (thickness 0.15) (arrow_length 1.27) (text_position_mode 0) (extension_height 0.58642) (extension_offset 0.5) keep_text_aligned Latest commits for file Schematics/LUTHERS_VCO.diy Update luther's layout Drill report for precadsr-panel.kicad_pcb Created on Tue Mar 5 20:19:51 2024 Copper Layer Stackup: T5 15.200mm 0.5984" (1 hole T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes T5 15.200mm 0.5984" (1 hole) T3 7.000mm 0.2756" (6 holes T4 10.000mm 0.3937" (4 holes T5 15.200mm 0.5984" (1 hole T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes) (with 4 slots) T2 5.000mm 0.1969" (1 hole) Total plated holes count 0 Hardware/Panel/precadsr-panel-Gerbers/precadsr-panel-CmtUser.gbr Normal file Unescape Hardware/PCB/precadsr_Gerbers/precadsr-F_SilkS.gbr Normal file View File Consider incorporating additional LED indicators for use of the top of the potentiometer pads and trace routing to de-bodge the pots. Updates the potentiometer shaft clf_indicator_angle_from_notch = 0; // 0 if indicator faces notch, 180 if it can fit; losing the bodge.
New Pull Request