synth_tools

Back

FH12-34S-0.5SH, 34 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SOP, 16 Pin (https://www.vishay.com/docs/83513/tcmd1000.pdf), generated with kicad-footprint-generator JST ZE side entry JST JWPF series connector, BM16B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-133 , 3 pins, pitch 5mm, size 30x9.8mm^2, drill diamater 1.15mm, pad diameter 2.3mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a single 0.75 mm² wires, basic insulation, conductor diameter 1.4mm, length 8.5mm, width 2.5mm solder Pin_ with flat with fork, hole diameter 1.2mm, length 11.3mm, width 3.0mm solder Pin_ with flat fork, hole diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-22A2, example for new part number: 26-60-5020, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP-I, 56 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation DA), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-LC, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Resistor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: https://www.vishay.com/docs/48064/_t58_vmn_pt0471_1601.pdf), generated with kicad-footprint-generator Harting har-flexicon series connector, DF52-3S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated.

New Pull Request

Labels Milestones