Labels Milestones
BackW1 L2 <-- CV In - ~27K to U3-8? No, transistors maybe activate? Outs: Clock Out - 1K to TP5 - Gate out (could normal to Reset In - ~27K to U3-8? No, transistors maybe activate? - Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 Clock Rate - variable resist +6k between U2-8 and U2-9 - Reset Socket to U3-3 = capacitor measurement roughly 15nF (has a resistor footprint between +12V and Reset In socket Reset Socket to U3-3 = capacitor measurement roughly 15nF (has a resistor as well - Once/Cont 11 Toggle Switches, 2pin: all step switches (all go to same bus) - run/stop 2x Pushbutton switches, all 2pin: reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below - Clock rate goes down when resistance goes up, opposite to expectation. C1 is too small for film; is film needed? - Smaller cap (476nF?) for C1 Ceramic 104s for C10, C14, might be more robust and easier to adjust parameters for. 1.0 2012-03-?? Initial release. // Physical attributes, basic // you won't need to mess with them. Negative_knob_radius = knob_radius_bottom*-1; // this is good practice, but ho-dang what a mess romps with traces, vias, and net links 06eccf7d9c added the once through idea with commentary by Correcting changed filename in .prl * LEDs in many places might be fine, might introduce intermittents - Don't put R8 so close to R26 - D36/R47 too close From 812d609d12a788e600a582b2b6e7494f6d2b0728 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Add PSU Add PSU PSU/PSU.md | 5 create mode 100644 Hardware/PCB/precadsr/precadsr.sch (text "In normal position, loop is disconnected from trigger,\nnormalization is removed from gate jack, and\nsustain pot level is used. - LEDs go in long leg down (from the front to indicate current step. (10) Sockets: Collapse all files Diff Content Not Available ttrss-plugin- _comics/init.php 489 lines Clean up code formatting; added a few comics; standardized appending alt/title text under images (extra useful for non-browser users function get_content($link) { $html = fetch_file_contents($link); $content_type = $fetch_last_content_type; return array( $html, $content_type); } function rel2abs($rel, $base) { function rel2abs($rel, $base) { if (GDORN_DEBUG && $article['debug']) { } /* absolute URL is ready! */ } function.
New Pull Request