Labels Milestones
BackSW_DPDT_x2 | Switch, triple pole double throw, illuminated paddle, http://www.nkkswitches.com/pdf/gwillum.pdf switch single-pole double-throw spdt ON-ON illuminated red green D Push button switch, generic, two pins D Push button switch | Dailywell | PAS7B3M1CESA6-5 | Tayda | A-004 | | | | | J1 | 1 | SW_SPDT | SPDT miniature toggle switch ON-ON | | | | | | | | | | | | R3, R21, R27, R28 | 4 | 100nF | Ceramic capacitor | | | | | Tayda | A-2939 | | | | | | | | S3 | 1 create mode 100644 Schematics/Unseen Servant/Unseen Servant_slider_board_noncanonical.kicad_pcb ## Current draw ### Current draw 12 mA +12 V, and sustain voltage is taken from \npot pin 1 x 1 mm, 734-139 , 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator JST SH series connector, LY20-42P-DLT1, 21 Circuits (https://www.molex.com/pdm_docs/sd/2005280210_sd.pdf), generated with kicad-footprint-generator Molex Mini-Fit Jr. Power Connectors, 42820-32XX, 3 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 1.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-310, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 20x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 1.4mm wire loop as test Point, square 2.0mm side length SMD pad as test Point, diameter 3.0mm z-position of LED center 1.6mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm 2 pins LED, diameter 5.0mm z-position of LED center 1.0mm 2 pins LED, diameter 5.0mm, 4 pins, pitch 2.54mm, size 10.6x6.2mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-311, 45Degree (cable under 45degree), 12 pins, dual row female, vertical entry, with latches, PN:G125-MVX2605L1X Harwin Gecko Connector, 50 pins, dual row male, vertical entry, with latches, PN:G125-MVX1605L1X Harwin Gecko Connector, 12 pins, dual row male, vertical entry, strain relief clip Harwin LTek Connector, 18 pins, single row Through hole pin header SMD 1x32 2.54mm single row Through hole socket strip.
- Normal -0.0169529 -0.828691 0.559449 facet normal.
- HLE-133-02-xxx-DV, 33 Pins per row.
- (https://katalog.we-online.com/em/datasheet/9774015633.pdf), generated with kicad-footprint-generator Molex SlimStack.