Labels Milestones
BackPlastic Package OnSemi CASE 100AQ for QRE1113, see https://www.onsemi.com/pub/Collateral/QRE1113-D.PDF OnSemi CASE 100AQ for QRE1113, see https://www.onsemi.com/pub/Collateral/QRE1113-D.PDF OnSemi CASE 100AQ for QRE1113, see https://www.onsemi.com/pub/Collateral/QRE1113-D.PDF OnSemi CASE 100AQ for QRE1113, see https://www.onsemi.com/pub/Collateral/QRE1113-D.PDF OnSemi CASE 100CY, light-direction upwards, see http://www.onsemi.com/pub/Collateral/QRE1113-D.PDF PhotoDiode, plastic SMD DIL, 4.5x4mm, area: 2.65x2.65mm, https://dammedia.osram.info/media/resource/hires/osram-dam-5467146/SFH%202440_EN.pdf DFN, 6 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=11791&prodName=TLP185), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 1 mm² wires, basic insulation, conductor diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00236, 6 pins, pitch 5mm, size 10x9mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-8-5.0-H pitch 5mm size 42.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-216, 45Degree (cable under 45degree), 36 pins, pitch 3.81mm, hole diameter 1.3mm, length 11.3mm, width 2.8mm solder Pin_ diameter 1.3mm, wire diameter 1.0mm wire loop as test Point, square 2.5mm side length SMD rectangular pad as test Point, square 3.0mm side length, hole diameter 1.0mm wire loop as test point, loop diameter2.6mm, hole diameter 1.3mm, length 11.3mm, width 2.8mm Capacitor C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*13mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 2.50mm length 4.6mm width 5.5mm Capacitor C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*13mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 22.50mm length 24mm width 8.6mm Capacitor C, Rect series, Radial, pin pitch=22.50mm, , length*width=24*12.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 63.20mm diameter 69.1mm Vishay TJ9 SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open SMD Solder Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 bridged with 2 pins, diameter 5.0mm 2 pins LED_Rectangular, Rectangular, Rectangular size 5.0x5.0mm^2 2 pins Red 5381 Series LED Yellow 5381 Series LED A20 Olinuxino LIME2, 1.2GHz, 512-1024MB RAM, Micro-SD, NAND or eMMC, 1000Mbit Ethernet A20 Olimex Olinuxino LIME2 development board https://www.olimex.com/Products/IoT/ESP8266/MOD-WIFI-ESP8266-DEV/resources/dimensions-WIFI-ESP8266-DEV.png Vibration motor, 2.3-3.2V, 14000rpm, 0.7G, https://www.vybronics.com/wp-content/uploads/datasheet-files/Vybronics-VZ30C1T8219732L-datasheet.pdf Broadcom LGA, 8 Pin (https://www.ti.com/lit/ds/symlink/tpa6110a2.pdf), generated with kicad-footprint-generator Molex Pico-Clasp series connector, DF52-5S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator Diode SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/ts3a27518e.pdf#page=33), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/tlc5971.pdf#page=39), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-170 , 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Stocko RFK MKS 16xx TE, 1-826576-3, 13 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2855-3)), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-0210, with PCB.
New Pull Request