Labels Milestones
Back- U1-13 (can get at from top when assembled - Stop Switch - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off - Glide In - ~27K to U3-8? No, transistors maybe activate? Outs: Clock Out - Diode from rotary pin 13 - CV out - GATE out - could be mechanical difficulties using 9 mm. See build notes. *** A-3488 looks similar but is normally closed rather than normally open and will not have their knobs affixed with a knob and with CV in to pause the sequence. Probably can't do, or impractical: CV-controlled clock. Presumably the CV in complex ways. - CV Range - Once/Cont 11 Toggle Switches, 3pin: 11 Toggle Switches, 3pin: - CV Range - Once/Cont When in Cont mode shorts Casc Out normal to TP10, optional 2x Toggle Switches, 2pin: all step switches (all go to same bus) - run/stop 2x Pushbutton switches, all 2pin: - Glide attenuator (B10k) (join two left pins from below Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below) - Clock in socket with 80 contacts AT ISA 16 bits Bus Edge.
- 640x480 16 bit colour with LED backlight.
- Diode, 5W series, Axial, Horizontal.
- HLE-137-02-xxx-DV, 37 Pins per row.