synth_tools

Back

Diameter7-5mm, Amidon-T25 L_Toroid Horizontal series Radial pin pitch 10.00mm length 11.5mm width 2.8mm solder Pin_ with flat with hole, hole diameter 2.5mm Resistor, Axial_DIN0207 series, Axial, Horizontal, pin pitch=100mm, , length*diameter=93*35.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf CP Axial series Axial Vertical pin pitch 3.50mm diameter 8mm Fastron 77A Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=9.52*5.33mm^2, , http://www.slottechforum.com/slotinfo/Techstuff/CD2%20Diodes%20and%20Transistors/Cases/Diode%20DO-27.jpg Diode DO-27 series Axial Horizontal pin pitch 7.5mm size 32.3x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 19965, 8 pins, pitch 10mm, size 105x8.1mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-508, 45Degree (cable under 45degree), 1 pins, pitch 3.5mm, size 22x8.3mm^2, drill diamater 1.3mm, pad diameter 2.4mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST ZE series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py VQFN, 20 Pin (http://www.ti.com/lit/ds/symlink/bq24006.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 24 Pin (https://www.invensense.com/wp-content/uploads/2015/02/PS-MPU-9250A-01-v1.1.pdf#page=39), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 26-60-5170, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Hirose DF12C SMD, DF12C3.0-50DS-0.5V, 50 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a box film cap instead of A4 Add note resulting from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3fah-0 A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack and switching ground contact, vertical PCB mount, https://www.neutrik.com/en/product/nc3maah AA Series, 3 pole male XLR receptacle, grounding: separate ground.

New Pull Request

Labels Milestones