Labels Milestones
Back// you can have. There aren't a lot of wiring and increases risk of noise on power rails. Things best left to external modules: - CV-controlled CV offset module - add a voltage to trigger a second sequencer's run, which then re-triggers the first. - Trigger out - Gate out (could normal to TP10, optional) - Casc out 2x Toggle Switches, 2pin: - Glide attenuator (B10k) (join two left pins from below Clock rate (B100k) (not sure yet which 2 pins LED, diameter 3.0mm 2 pins diameter 3.0mm Plated Hole as test Point, square 2.0mm side length SMD rectangular pad as test Point, diameter 3.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-47XEC(Ver.9A).pdf LED Round FlatTop diameter 3.0mm z-position of LED center 2.0mm, 2 pins, pitch 10.2mm, size 15.2x8.3mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix PT-1,5-4-3.5-H pitch 3.5mm size 35.7x7mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-204, 45Degree (cable under 45degree), 11 pins, pitch 10mm, size 92.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10686 pitch 3.5mm size 42x7.6mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix PTSM-0,5-2-2.5-V-THR, vertical (cable from top), 12 pins, pitch 3.5mm, size 32.5x8.3mm^2.
New Pull Request