Labels Milestones
BackCC0 with a capacitor / resistor pair, see Fireball's hard sync to schematic, laid out PCB with exploratory 8hp layout Add schematic, start on PCB Added input resistor for sync; placed everything on PCB with 2 copper strips net tie solder jumper bridged SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, open SMD Solder Jumper, 1x1.5mm rounded Pads, 0.3mm gap, open SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, bridged with 1 copper strip, labeled with numbers SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open, labeled with numbers SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strips SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, pads 1-2 bridged with 2 copper strips SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open, labeled with numbers SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, open, labeled with numbers SMD Solder Jumper, 1x1.5mm rounded Pads, 0.3mm gap, bridged with 1 copper strip SMD 1x33 2.00mm single row style1 pin1 left Surface mounted pin header SMD 2x07 1.27mm double row surface-mounted straight pin.
- Vertex -0.596366 -6.43809 7.83604 facet.
- Https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=264, NSMD pad definition.