synth_tools

Back

Pitch 25.10mm diameter 28mm Inductor, Radial series, Radial, pin pitch=29.20mm, , diameter=28mm Inductor Radial series Radial pin pitch 5.00mm length 7mm width 8mm Resistor, Radial_Power series, Radial, pin pitch=29.30mm, , diameter=29.8mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf Inductor Radial series Radial pin pitch 7.50mm length 10mm width 3.0mm solder Pin_ with flat with hole, hole diameter 1.2mm THT rectangular pad as test point, loop diameter2.6mm, hole diameter 2.8mm SMD rectangular pad as test Point, diameter 4.0mm, 2 pins, pitch 5mm, size 15x10mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block TE 282834-7, 7 pins, pitch 5.08mm, size 55.9x11.2mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00084 pitch 10mm Varistor, diameter 15.5mm, width 5mm, pitch 7.5mm size 62.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-309 45Degree pitch 5mm size 15x8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-204, 45Degree (cable under 45degree), 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf LED_Rectangular Rectangular Rectangular size 3.9x1.9mm^2, 2 pins, Rectangular size 5.0x2.0mm^2 2 pins LED diameter 3.0mm z-position of LED center 2.0mm, 2 pins, pitch 10mm, size 32.3x14mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-3-8-5.08, 8 pins, pitch 5mm, size 45x9.8mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST ZE series connector, B12B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-0830, 8 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator Inductor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator JST GH series connector, SM13B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator Molex Micro-Fit 3.0 Connector System, 43045-1600 (alternative finishes: 43045-022x), 1 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 0.5 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: A-41792-0010 example for new part number: 09-65-2098, 9 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV-BE-A, 45 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator JST PHD series connector, S12B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 0.75 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 133, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon.

New Pull Request

Labels Milestones