synth_tools

Back

Https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf Diode DO-34_SOD68 series Axial Horizontal pin pitch 7.50mm length 10.3mm width 5.7mm Capacitor C, Disc series, Radial, pin pitch=15.00mm, , length*width=16.5*6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 5.08mm size 35.6x10.6mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-16-3.5-H pitch 3.5mm size 24.5x7.6mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-524, 45Degree (cable under 45degree), 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-13GD(Ver.11B).pdf LED Round FlatTop diameter 5.0mm z-position of LED center 1.0mm 2 pins LED diameter 10.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2, 2 pins, pitch 3.5mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 1 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 1.5mm, hole diameter 1.5mm (loose fit), length 11.0mm solder Pin_ with flat fork, hole diameter 2.0mm SMD pad rectangle square SMD pads Net tie, 3 pin, 0.5mm square SMD pads Net tie, 3 pin, 1.0mm round THT pads Laser Gaming Sensor ADNS-9800 Fiberoptic Transmitter TX, HFBR series (https://docs.broadcom.com/docs/AV02-3283EN Fiberoptic Receiver RX, HFBR series (https://docs.broadcom.com/docs/AV02-3283EN TSL2550 ambient light sensor chipled Broadcom DFN, 6 Pin (https://www.jedec.org/sites/default/files/docs/MO-193D.pdf variant AB), generated with kicad-footprint-generator Molex CLIK-Mate series connector, S6B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Soldered wire connection, for 2 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00243 pitch 10.2mm size 35.6x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00032 pitch 10mm size 55x9mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-101, 45Degree (cable under 45degree), 9 pins, pitch 3.5mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 1.5 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-LC, 22 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py HVQFN, 24 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=278), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 3 times outer diameter, generated with kicad-footprint-generator Resistor SMD 0612 (1632 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: https://www.vishay.com/docs/30100/wsl.pdf), generated with kicad-footprint-generator Samtec HLE.

New Pull Request

Labels Milestones